Shift 159 | 163
Full Camber Fun The 2024 SHIFT is the back foot drivers answer to the Pitch Wing. With maximum volume shift, the wide 3D nose of the Shift engages early and decisively, so the board whips into the turn with precision and control. Laid out trenches from corduroy groomer to waist deep powder, you can keep yourself centred over the board, reducing back leg fatigue, so you can charge hard all day.
A full camber design, with 3D base fore and aft of the bindings, gives this board an exciting and lively feel, that charges effortlessly in all conditions.
The Shift features our new Oscillate technology, damping nose vibration and chatter so you can ride with confidence no matter what the conditions are. We could tell you exactly what Oscillate is, but then everyone would do it, so you're just going to have to trust us when we say... it's rad!
Length | 163cm | 159cm |
Nose Width | 330mm | 325mm |
Waist Width | 284mm | 267mm |
Tail Width | 309mm | 290mm |
Effective Edge | 1250mm | 1210mm |
Nose Length | 350mm | 350mm |
Nose Rocker | 56mm | 54mm |
Tail length | 60mm | 60mm |
Tail Rocker | 15mm | 11mm |
Camber | 5mm | 5mm |
Stance Width | 480 to 560mm | 490 to 560mm |
Parabolic Sidecut | 10.2m - 11.6m | 7.8m - 9m |
Base Profile | Powder Hull | Powder Hull |
Recommended Stance | R: -5/+15 | F +10/+35 | R-5/+15 | F +10/+35 |
Core | Poplar+ Paulownia |
Lamination | Tri-ax fiberglass w carbon stringers |
Resign | Epoxy Pre-preg |
Base | Sintered 7700 |
Damping | Twin Stringer |
Core
|
Poplar
|
Lamination
|
Tri-ax fiberglass
|
Resign
|
Epoxy
|
Base
|
Sintered 5000
|
Top Sheet
|
Matte Scratch Resistant
|